Philips AVENT SCD831, Manual

Page: 16 / 316

- English 14 -
AUDIO mode
1 Press the mode button on the side of the parent unit to switch to
AUDIO mode�
When the AUDIO mode is activated, the display of the parent unit
switches off. After 3 seconds the display will completely turn off and
the status bar will disappear�
Note: The status bar is not visible when the display is off.
Note: The link light shows that the parent unit is still on and connected
to the baby unit�
Note: Set the sensitivity level to 'very high' to have continuous sound
on the parent unit� Please see the Sensitivity level chapter for more
information�
All sounds are constantly transmitted to the parent unit� If your baby
cries, the display of the parent unit is still off, but the sounds detected
by the baby unit are transmitted to the parent unit.
VOX mode
1 Press the mode button on the side of the parent unit to switch to VOX
mode�
Note: When the display is on, the selected mode is shown in the status
bar. The status bar is not visible when the display is off.
When the VOX mode is activated, the display and sound of the parent
unit switch off, if there is no sound detected for 20 seconds.
AUDIO
AUDIO
20°C
1
AUDIO
20°C
1
AUDIO
VOX
VOX
20°C 1 AUDIO