Philips 741420008, Operating Instructions Manual

Page: 36 / 132

36
13.2.3 Cleaning the pannarello.
After using the pannarello, you should
clean it thoroughly to ensure maximum
hygiene and functionality over time. The
cleaning steps are as follows:
• Loosen the ring nut (39) of the pannarello.
• Remove the pannarello from the steam tube.
• Take off the outer casing (40) of the
pannarello.
• Clean all parts of the pannarello
thoroughly with running drinking water.
• Reassemble the pannarello.
• Insert the pannarello back into the steam
tube.
• Tighten the ring nut (39).
• Remove the outer sleeve (item 40) so that
you can hold the inner sleeve still when
tightening the nut.
Note: if the ring nut is not
securely tightened, the
pannarello may slip out during use.
13.3 Cappuccinatore
The cappuccinatore is a device
that automatically froths milk,
making it extremely easy to prepare
classic Italian-style cappuccino.
To install the cappuccinatore, proceed as
follows:
• Make sure that no other devices are fitted
on the steam tube; you must remove any
devices that have been installed.
I.E. the “Pannarello”.
• Loosen the ring nut (39) without slipping
it off the cappuccinatore.
• Insert the cappuccinatore in the steam
tube to a depth of about 3 cm.
• Tighten the ring nut securely.
Note: if the ring nut is not
securely tightened, the
cappuccinatore may slip out during
use.
13.3.1 Hot water with the
cappuccinatore
To dispense hot water using the
cappuccinatore, follow the
i
i
Optional Accessories
40
39
39