Philips 40PFL9904H User Manual Download

Page: 31 / 256

1.3.3 Wall mounting

1/8

Caution

Wall mounting the TV requires special skills and should

only be performed by qualified personnel. The TV wall

mounting should meet safety standards according to the

TV's weight.

Koninklijke Philips Electronics N.V. bears no responsibility

for improper mounting or any mounting that results in

accident or injury.

You must read the safety precautions before positioning

the TV.

Wall mounting

Instructions on how to wall mount the TV are also included

in the Start guide that comes with the TV.

To wall mount the TV, use the bracket and the 2 small

plastic tubes (spacers) included in the packaging.

Read the instructions on the following pages.

...

Summary of Contents for 40PFL9904H

































































































































































































































































Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands

Philips 40PFL9904H, User Manual

Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands