Philips 40PFL9904H User Manual Download

Page: 10 / 256

1.1.2 Safety

5/5

Risk of overheating!

Always leave a space of at least 10 cm around the TV for

ventilation. Ensure curtains or other objects never cover

the ventilation slots on the TV.

Lightning storms

Disconnect the TV from the power outlet and antenna

before lightning storms. During lightning storms, never

touch any part of the TV, power cord or antenna cable.

Risk of hearing damage!

Avoid using earphones, headphones at high volumes or for

prolonged periods of time.

Low temperatures

If the TV is transported in temperatures below 5°C, unpack

the TV and wait until the TV temperature matches the

room temperature before connecting the TV to the mains.

Summary of Contents for 40PFL9904H

































































































































































































































































Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands

Philips 40PFL9904H, User Manual

Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands