Philips 40PFL9904H User Manual Download Page 226

Page: 226 / 256

5.5.2 EasyLink Remote Control

With EasyLink Remote control, the TV remote control

commands are sent directly to the device you are watching

on TV.

Except for the Home

key, all remote control commands

will try to operate the device. Some commands might not

work with the device.

The TV comes with EasyLink Remote control set to On.

To switch EasyLink Remote control off, press

> Setup >

Installation > Preferences > EasyLink Remote control.

EasyLink must be switched on before you can switch on

EasyLink Remote control.

Switch the remote control commands

To switch to TV control, press

and select Watch TV.

To control another device, press

and select the other

device.

Summary of Contents for 40PFL9904H

































































































































































































































































Search results

Summary of Contents for 40PFL9904H

Reviews:

Brands by name

Popular brands

Philips 40PFL9904H, User Manual

Search results

Summary of Contents for 40PFL9904H

Reviews:

Brands by name

Popular brands