Philips 40PFL9904H User Manual Download

Page: 240 / 256

6.6 Devices

1/2

HDMI connections

• The HDMI-HDCP procedure might take a few seconds

before the TV shows the picture from a device.

• If the TV does not recognise the device and the screen

shows no picture, try switching from one device to another

and back again to restart the HDCP procedure.

• If sound interruptions occur persistently, see the user

manual of the device to verify the output settings. If that

does not help, connect an additional audio cable.

• If a DVI to HDMI adaptor is used, verify that an additional

audio connection is in place to complete the DVI

connection.

HDMI with EasyLink

• Verify if the connected device supports the HDMI-CEC

standard and is properly set up. Read the user manual that

comes with the device.

• Verify if the HDMI cable is properly connected.

• Verify if EasyLink is activated in

>Setup > Installation >

Preferences > EasyLink.

Summary of Contents for 40PFL9904H

































































































































































































































































Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands

Philips 40PFL9904H, User Manual

Search results

Summary of Contents for 40PFL9904H

Reviews:

Related manuals for 40PFL9904H

Brands by name

Popular brands