Mechanical Instructions
EN 12
EJ2.0U LA
4.
Figure 4-17 LCD panel removal
To remove the LCD-panel, carry out the following steps:
1.
Remove screws [1].
2.
Remove brackets [2].
3.
Important:
Unplug the LVDS connector [3] on the LCD
panel. Be careful, as this is a very fragile connector!
4.
Unplug all other connectors [3].
5.
Remove screws [4].
6.
Lift the metal frame (together with all PWBs) from the set.
Take care not to damage the fragile LVDS cable.
7.
After removal of the metal frame, you can lift the LCD panel
from the front cabinet.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See Figure "Cable
dressing".
•
Ensure that the conducting tape [1] at both sides of the
LCD panel is placed in its original position. See Figure
“Conducting tape”.
G_15940_059.eps
260506
3
2
2
4
4
4
1
1
1
1
1
1
4
1
