Mechanical Instructions
EN 11
EJ2.0U LA
4.
4.3.8
Small Signal Board (SSB)
Figure 4-12 SSB bottom shielding
1.
Remove the connector fixation screws [1] at the connector
plate (bottom side, see Figure “SSB bottom shielding”).
2.
Unplug the LVDS connector [1] on the SSB (SSB top side,
see Figure “SSB top view”). Be careful as it is very fragile.
3.
Unplug all other cables on the SSB.
4.
Remove the mounting screws [2] that hold the SSB, and lift
the panel from the set.
Figure 4-13 SSB top view
4.3.9
AmbiLight Inverter Panel
The AmbiLight inverter panels are placed on the inside of the
rear cover. See figure “AmbiLight inverter panels” for details.
Figure 4-14 AmbiLight inverter panels
Left AmbiLight Panel Removal
See figure “Left AmbiLight panel removal” for details.
Figure 4-15 Left AmbiLight panel removal
1.
Unplug connectors [1].
2.
Remove screws [2].
3.
Remove panel.
Right AmbiLight Panel Removal
See figure “Right AmbiLight panel removal” for details.
Figure 4-16 Right AmbiLight panel removal
1.
Unplug connectors [1].
2.
Remove screws [2].
3.
Remove panel.
4.3.10 LCD Panel
See figure “LCD panel removal” for details.
G_16290_072.eps
310106
1
1
1
1
1
1
G_15940_055.eps
240506
2
1
G_15940_056.eps
240506
REAR COVER
REAR COVER
LEFT
LEFT
RIGHT
RIGHT
G_15940_057.eps
260506
2
2
1
G_15940_058.eps
260506
2
1
2
