Mechanical Instructions
EN 10
EJ2.0U LA
4.
Figure 4-8 Keyboard Control panel (2)
4.3.3
Side I/O Panel
6.
Unplug connectors [1].
7.
Remove screws [2]. See figure “Side I/O and LED Panel
removal” for details.
When defective, replace the whole unit.
Figure 4-9 Side I/O and LED Panel removal
4.3.4
LED Panel
1.
Release clip [3].
2.
Remove the panel.
3.
Unplug connector [4].
When defective, replace the whole unit.
4.3.5
Speakers
After removal of the rear cover, you can access the speakers.
Caution:
never disconnect the speakers with a playing set,
because otherwise the class-D audio amplifiers could be
damaged!
4.3.6
Stand-by Power Supply/Audio Amplifier Panel
1.
Disconnect all connectors [1] from the panel.
2.
Remove the fixation screws [2] from the panel.
3.
Take the panel out of its brackets (it hinges at the right
side).
Figure 4-10 Stand-by/Audio panel
4.3.7
LCD Supply Panel
1.
Disconnect all cables [1] from the panel.
2.
Remove the fixation screws [2] from the panel.
3.
Take the panel out of its brackets (it hinges on the right
side).
Figure 4-11 LCD supply panel
G_15940_051.eps
240506
2
3
G_15940_052.eps
240506
2
1
3
4
G_15940_053.eps
260506
2
2
2
2
1
1
G_15940_054.eps
260506
2
1
1
1
