Philips 107T6, Service Manual

Page: 21 / 100

ISP (In System Program)
107T6 CRT
Go to cover page
21
Configuration and Procedure
ISP (In System Program) software is provided to upgrade the
firmware of CPU.
System and equipment requirement:
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system windows 95/98.
3. EDID 46.EXE program (12NC: 3138 106 10103) and ISP Software
(12NC:3138 106 10375) (Provided in the CD-ROM SERVICE MANUAL)
4. Software DDC Alignment kits(3138 106 10079) shown as Fig. 1.
The kit contents: a. Alignment box X 1
b. Printer cable
X 1
c. (D-sub) to (D-sub) cable X 1
d. (DVI-D) TO (D-sub) cable X 1
Fig. 1
Step 1. Installation of ISP Software
1. Make a folder in your computer as shown in Fig. 2. For example
C:\107T6
2. Copy ISP Software(ISP.zip 12NC: 3138 106 10375) , EDID program
(edid 46.exe 12NC:3138 106 10103) and Demic Code (Demic.hex)
from the CD-ROM to C:\107T6.
3. Unzip the ISP.zip, and execute the ''I2cHa32-Driver.exe" to install
driver.
1) Bring up the window as shown in Fig. 2, click "I agree with the
above terms and conditions", then click "next".
4. Execute the "Setup.exe" of the 107T6 folder to install execution file.
1) Bring up the window as shown in Fig. 4, click "OK".
Fig. 2
2) Bring up the window as shown in Fig. 3, click "OK", which means
you have already installed I2Cdriver successfully.
Fig. 3
Fig. 4
2) Bring up the window as shown in Fig. 5, click the icon of the left
side of the window to begin setup.
Fig. 5
3) Bring up the window as shown in Fig. 6, click"continue".
Fig. 6
4) Bring up the window as shown in Fig. 7, which means you have
setup the ISP-Programming successfully, click "ENTER" to confirm
it.
ENTER
Fig. 7