This product can be operated in any Z-Wave™ network with other Z-Wave™ certified
devices from other manufacturers. All non-battery operating nodes within the network
will act as repeaters regardless of the vendor in order to increase reliability of the net-
work.
The table below provides a summary of operations of basic Z-Wave™ functions.
Please refer to the instructions for your Z-Wave™ Certified Primary Controller to ac-
cess the Setup function, and to Add/Remove/associate devices.
Function
Description
Annotation
No node ID
The Z-Wave
™
Controller does not allocate a
node ID to the Switch.
LED light flashes once
every one second and
last for 30 seconds.
Add
(Classic Inclu-
sion)
1.
Put your Z-Wave
™
controller into
inclu-
sion mode by following the
instructions
provided by the controller manufacturer.
2.
Press the include button three times within
3 seconds to enter inclusion mode.
SmartStart
1.
The product has a DSK string. Key in the
first five digits to initiate the SmartStart
process, or scan QR code.
Ex: DSK: 18112-24021- 48001-62259-
57092-27453-08187-47408
2.
SmartStart
enabled products can be added
into a Z-Wave
™
network by scanning the
Z-Wave
™
QR Code on the product, with
a controller providing SmartStart inclusion.
No further action is required and the
SmartStart product will be added automat-
ically to the closest network within 10 min-
utes of being switched on.
Notice:
The QR Code can be found on the device
PAD19 or in the box.
Remove (Ex-
clusion)
1.
Put your Z-Wave
™
controller into
exclu-
sion mode by following the instructions
provided by the
controller manufacturer.
2.
Press the include button three times within
3 seconds to enter exclusion mode.
3.
Node ID will be excluded.
LED light flashes once
every one second and
last for 30 seconds
Reset
1.
Press the include button four times within
3 seconds and hold on the button press
without releasing.
LED light will be on sta-
tus
4
