EN
– 23 –
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
Information
DVD / VCR
PROBLEM
CORRECTIVE ACTION
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond
to the remote control.
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet (7m) of this unit.
• Check if the right mode is selected. If it’s not in the right mode, press
[DVD]
or
[VCR]
, whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal sound from the radio
in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confi rm infrared light through the
digital camera.
Poor picture or noise.
• Interference signal may be received. Change the position and orientation of the unit.
VCR
Timer recording is impos-
sible.
• Make sure the Timer Recording is set correctly.
• Make sure TIMER indicator on the front panel lights up. If not, press
[SUBTITLE/T-SET]
.
• Make sure the VCR clock is set correctly.
Cannot go into record
mode.
• Make sure the tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press
[VCR]
on the remote control so that the VCR SOURCE light is lit.
Playback picture is partially
noisy.
• Adjust tracking control for a better picture by pressing
[CHANNEL
L
/
K
]
]
on the unit or
[SKIP/CH.
G
/
K
,
H
/
L
]
on the remote control.
Cannot view a tape but the
audio is OK.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.
• Make sure the VCR is not in the Menu mode.
No or poor, playback picture.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
TV programs cannot be seen
normally.
• Re-check the ANT-IN and ANT-OUT connections. See the front page and page 6.
• Press
[VCR]
.
• Press
[VCR]
on the remote control to activate it in the VCR mode. Check if the VCR SOURCE light is lit, then set it to the TV position by pressing
[VCR]
.
Video or color fades in and
out when making a copy of
a video tape.
• You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Cannot remove the tape.
• Check if this unit is in the VCR mode. If not, press
[VCR]
on the remote control to switch the mode.
DVD
No picture.
• Connect the video cable fi rmly.
• Insert a correct video disc that plays on this unit.
• Press
[DVD]
on the remote control. Check if the DVD SOURCE light is lit. Then try other DVD features.
Disc cannot be played.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fi ngerprints, scratches, or dusts on its surface.
No sound.
• Connect the audio cables fi rmly.
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output
• This unit does not support DTS audio.
-This is not a malfunction.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
does not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from diff erent camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears on
the screen, prohibiting an
operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
3
Select the desired PLAYER
MENU Language, using
the number buttons
.
Hint
• If you do not wish to
initialize at step 2,
press
[SETUP]
to exit
the menu.
<SETUP MENU>
Press
twice.
SETUP
STOP
ENTER
ENTER
ENTER
ENTER
INITIALIZE_INITIALIZE
INITIALIZE
YES
ENGLISH
FRENCH
SPANISH
SELECT MENU LANGUAGE
1
2
3
2
Select “INITIALIZE”.
Reset to the Default Setting (Except for PARENTAL Setting)
F
1
Press
[SETUP]
.
E8C1UCD_EN.indd 23
E8C1UCD_EN.indd 23
2007/04/03 9:49:33
2007/04/03 9:49:33
