FLIP-DOWN SCREEN
VIDEO PLAYERS
(Rear Bunk models only)
–If Equipped
The flip-down LCD screen DVD Video
Players are mounted overhead in each of the
bunk beds.
The Video Players operate
independently so the occupant of one bunk
may watch a DVD while the other watches
a different DVD. The same DVD can be
watched on both players at the same time as
well. The top player is the master unit. Place
the DVD in the top player and begin playing
the DVD. Select AV1 input on the unit in
the lower bunk to view the DVD playing in
the upper bunk.
The players each contain auxiliary
audio-video inputs for connection of a video
game system or other audio-video
equipment if desired.
Remote Control and Wireless
Sound
•
A
sensor
array
above
the
screen of each Video Player receives
command signals from the remote
control.
•
The sensor array also continuously
transmits wireless sound signals for
reception on IR wireless headphones.
•
See Video Player instruction guide in
your InfoCase for remote control
instructions and additional information
on wireless headphones.
12-Volt Master Power
•
The Video Players
operate on 12-volt DC
current. Turn on the 12-
volt master power (TV)
switch shown, located on
the backwall of the top
bunk.
NOTE: To avoid drain on the 12-volt house
battery, we recommend turning the
master power switch off when Video
Players will not be in use.
Video Player Power ON/OFF
•
Press the POWER button on
either the remote control or
the unit once to turn the
power on. Press the same
button to turn the player off.
•
Push the open button (located on the
front of your screen) and lower the
monitor to the desired level.
To Play DVD
•
Insert the DVD label
side down (facing
you) into the slot on
the side of the
player. The player
will automatically switch to DVD mode.
The screen will display the DVD logo
and begin to read the disc.
•
The DVD may load directly to the main
title/menu screen or it may begin to play
previews. You may be able to skip
previews if desired by pressing the
NEXT button on the remote until you
see the main menu screen.
•
When the main menu screen appears,
press the PLAY button on the player or
ENTER button on the remote control to
begin playing the feature, or use the
arrow buttons to select the desired entry.
•
Volume is adjusted with the +/- buttons
on the player or the remote control.
To Play CD Audio (or CD Video)
•
The Video Player is also capable of
playing CD Audio music and CD Video
discs.
•
Insert the CD label side down (facing
you) into the slot on the side of the
player. The player will automatically
switch to proper mode to play audio or
video CD.
To Connect Game Systems or
Other A/V Components
•
Plug the audio
and video
cables of the
game system or
component into the audio-video input
jack on the side of the Video Player (a
3.5mm adapter cable may be required).
•
Switch the game system or component
ON.
Continued—
