Phihong POE125U-4AT-N-R User Manual Download

Page: 41 / 44

Phihong USA Corporation | 47800 Fremont Blvd., Fremont, CA 94538 | 1.510.445.0100 | www.phihong.com

After a successful TFTP boot loading process, restore your PC’s

Internet Protocol

(TCP/IP)

settings to <

Obtain an IP address automatically

> and <

Obtain DNS server

address automatically

> to allow normal network activity.

5.2. Updating EEPROM Contents with POEB-x.x.bin

After the POEA-x.x.bin update is complete, the web/SNMP interface image POEB-x.x.bin needs
to be uploaded into the internal EEPROM. There are two methods to updating the POEB-x.x.bin.

Method One:

In the address bar of your internet browser, enter

http://hostname/upload

, where

hostname

is the

string corresponding to the Midspan IP address. Then use the

Browse...

button (see Fig.5.3 Upload

in Internet Explorer) to locate the file POEB-x.x.bin, then click the

Upload

button.

Figure 30: Upload in Internet Explorer

If the EEPROM is successfully updated, <Software Update Successful > will be displayed in a
new window. Click on

Site main page

to open the main controller.

Summary of Contents for POE125U-4AT-N-R













































Search results

Summary of Contents for POE125U-4AT-N-R

Reviews:

Related manuals for POE125U-4AT-N-R

Brands by name

Popular brands

Phihong POE125U-4AT-N-R, User Manual

Search results

Summary of Contents for POE125U-4AT-N-R

Reviews:

Related manuals for POE125U-4AT-N-R

Brands by name

Popular brands