Tools required before installing the charger onto the Wall-Mount
Bracket are:
• Wire stripper
• Crimpers for ring terminals
• Phillips screwdriver for M4 – M6 1-3/8 inch or 34 mm drill bit
• Voltmeter or digital multimeter (for measuring AC voltage at the
installation site)
• The inserting cable should meet the best waterproof performance
requirements. It is recommended to use a 3 core / 6AWG or 14mm²
cable (XLPE-90°C, THHN-90°C, or equivalent) to pull the cable from
the distribution box. The maximum outer diameter of the cable
should be 16mm–23mm.
• Level ruler
• Pencil or marker
• Machine drill
•
Ring terminal (recommend type 14-5) for 6 AWG wire, and fixed by
M5 slotted head screw.
• It is recommended to use 1-inch liquidtight flexible metal conduit
compliant with NEMA 4 class
• Slotted head screwdriver for M5
9.4 Tools and Materials Required
Before installing the wall-mount bracket, you should confirm that
the loading capacity of the wall can reach a weight of 40 kg. When
installing on a cement wall, you can use the included expansion screw
to install the bracket and use a cement drill to drill holes on the cement
wall (Ø8mm) following the hole spacing in accordance with 3.2.
When installing on a wooden wall, you can directly use the included M5
self-tapping screws to install the wall-mount bracket and use the wall-
mount backplane to lock and install on the wall directly.
9.5 Wall-Mount Bracket Installation Requirements
MC-
AX Series - User Manual
19
Summary of Contents for AX Series
Page 2: ......
