MC-
AX Series - User Manual
23
Installation and setting of the network cable
Remove the waterproof plug from the Internet interface at the bottom left of
the wire box. Feed the network cable into the wire box through the network
cable entrance. Once the network cable is in, insert the RJ45 connector into the
connection port on the back of the charger.
STEP 4
STEP 5
Setting of the power supply type and grounding type
There are different settings depending on the LAN and the country where the
machine is installed. Please refer to Section 9.2 "Power Grid Connection and
Grounding Type" for details.
1 2
Summary of Contents for AX Series
Page 2: ......
