29
30
6.10.5 User Confi g
The WebGUI and Telnet username/password are set on this page.
Two management levels are available: “Administrator” and “General
User”. The administrator username (“admin”) cannot be changed.
The “Administrator” user has access to change all settings. The
“General User” is not permitted to access or change information on
the EDID Settings or System Settings pages.
6.10.6 System Settings
This page provides system confi guration options including turning the
power on/off, changing the network settings, downloading/restoring
saved system confi gurations, resetting the system to factory defaults
and updating the fi rmware.
29
The Set EDID Input Content section allows for the assignment of an
EDID to each individual input port, or to all inputs at once. Click the
selection bar to toggle between individual assignment, or all inputs.
The unit comes with the following 6 default EDIDs:
-
FHD/2CH:
1080p/60Hz(148M), 2.0 LPCM, 8-bit color.
-
FHD/MCH:
1080p/60Hz(148M), 7.1 LPCM and bitstream, 8-bit color.
-
4K UHD/2CH:
3840×2160p/30Hz (297M), 2.0 LPCM, deep color
(8/10/12-bit).
-
4K UHD/MCH:
3840×2160p/30Hz (297M), 7.1 LPCM and bitstream,
Deep Color (8/10/12-bit).
-
4K UHD+/2CH :
3840×2160p/60Hz (594M), 2.0 LPCM, deep color
(8/10/12-bit).
-
4K UHD+/MCH:
3840×2160p/60Hz (594M), 7.1 LPCM and bitstream,
deep color (8/10/12-bit).
Note: In some rare cases it is possible for custom or external EDIDs to
cause compatibility issues with certain sources. If this happens, it is
recommended to switch to one of the 6 default EDIDs for maximum
compatibility.
6.10.4 HDBaseT & H/W Info
This page provides information concerning the temperature inside
the matrix near critical components (areas 1 & 2) and the HDBaseT
fi rmware versions used in the matrix and in connected receivers.
