3
3
• Bi-directional IR support over HDBaseT
• Control via front panel controls, Ethernet (Telnet & WebGUI), RS-232,
& IR remote
• 1U rack mounted design
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
2.2
iso lated
+
35M
A
B
C
D
E
F
1
2
3
4
5
6
9
8
7
10
LOCK
ENTER
PRESET
/CANCEL
IN
OUT
+
-
MENU
1 2 3
6 7 8 9
5
10
4
1
POWER:
Press this button to power the unit on or place it into stand-
by mode.
Note: Network functionality and PoH remain active when the unit
is in stand-by mode.
2
POWER LED:
This LED will illuminate GREEN to indicate the unit is on
and receiving power. When the unit is in stand-by mode the LED
will illuminate RED.
3
IR WINDOW:
Accepts IR signals from the included IR remote for
control of this unit only.
4
OUTPUT A~F, INPUT 1~4 & Number 1~10:
Press the “OUT” button to
enter output selection mode. Next, press the output keys (A~F) of
the outputs you wish to route a source to (they will fl ash to indicate
selection). Next, press the “IN” key followed by the input (1~4)
you wish to route to the selected outputs. Finally, press “ENTER” to
confi rm your selection and execute the routing change.
For example, if you wish to display input 1 on outputs A~D then the
following sequence of button presses should be performed: OUT →
A, B, C, D → IN → 1 → ENTER
When directly entering Ethernet address information into the unit
all 10 buttons are used to represent the numbers from 0 to 9 (button
10 = 0) to make number entry more streamlined.
5
MENU/CANCEL:
Press the “MENU/CANCEL” button to enter the
