PhD Solutions MXC-U-P442-A-HDTL, Operation Manual, Page: 16 / 48

11 11
<Command> {Port1}+{Port2}+{Etc.} {Parameter [= Value]}
Examples: HDMI_Out E+F VideoSrc=1
HDBT_Out A+B+C VideoSrc=3
• Multi-Slot Command Format (ZoneAvPair)
The ZoneAvPair command allows for multiple slots on a single HDBaseT
or HDMI output to be assigned the same value simultaneously. Use
the following syntax to accomplish this. Note that each additional slot
uses the “+” character for separation. The number of slots allowed in
a single command is limited by the number of slots on that specifi c
interface.
ZoneAvPair HDBT_Out {Port} Slot {Slot1}+{Slot2}+{Etc.} {Param [= Value]}
Example: ZoneAvPair HDBT_Out B Slot 1+3+5 VideoSrc = HDMI_In 2
6.8.2 Full Command List
COMMAND DESCRIPTION
HDMI_Out M VideoSrc=XXX Set the video source for an
HDMI output.
M = E~F
Available XXX values:
HDMI_In n [n = 1~4]
HDMI_Out M VideoSrc=Default Reset the video source of an
HDMI output to the factory
default.
M = E~F
HDMI_Out M Mirroring=XXX Set the audio/video mirroring
source for an HDMI output.
M = E~F
Available XXX values:
HDBT_Out n [n = A~D]