73
13.
On the H
2
O
2
Decontamination Step1 screen,
the system check starts automatically. If the system
is normal, the display leads the H
2
O
2
Decontamination Step2 screen. When the system
is abnormal, refer to Table 10 on page 94.
14.
On the H
2
O
2
Decontamination Step2 screen,
press OK key to lead the H
2
O
2
Decontamination
Step3 screen and H
2
O
2
decontamination is started.
H
2
O
2
decontamination is performed automatically
from Step3 to Step8 (procedure
15
).
Note:
·
The outer door is locked with electric lock for
safety until completion of H
2
O
2
decontamination.
·
Buzzer sounds when H
2
O
2
decontamination is
completed (About 100 minutes later).
CAUTION
The electric lock will remain locked if power supply is cut off during H
2
O
2
decontamination. After the power
supply is recovers, the H
2
O
2
gas resolution process will start execution and finish automatically. Execute
the decontamination again because the decontamination is not completed.
WARNING
Do not use the unlock key to unlock the outer door during H
2
O
2
decontamination or during H
2
O
2
gas resolve by UV.
Doing so may cause harm to health from H
2
O
2
gas leakage.
●
Step3 is the process to warm the chamber
temperature to 45
o
C.
Note:
By pressing Abort key, H
2
O
2
decontamination is stopped in the middle of
decontamination and go to Step8 (The End of H
2
O
2
decontamination).
