99
SPECIFICATIONS
Product name
O
2
/CO
2
Incubator MCO-170ML
External dimensions
W620 mm x D730 mm x H905 mm
Internal dimensions
W490 mm x D523 mm x H665 mm
Interior volume
161 L
Exterior
Painted steel (Rear cover has no paint)
Interior
Stainless steel containing copper
Outer door
Painted steel
Inner door
Stainless steel with gasket
Gastight split door
4 doors made of tempered glass
Trays
3 trays made of stainless steel containing copper
W470 mm x D450 mm x H12 mm
Maximum load: 7 kg/tray
Access port
Inner diameter: 30 mm, On the back side
Insulation
Styrene AcryloNitrile copolymer
Heating system
DHA system (heater air jacket system)
Heater
285 W
Humidifying system
Natural evaporation with humidifying pan
Temperature controller
PID control system
Temperature display
Digital display
CO
2
controller
PID control system
CO
2
density display
Digital display
O
2
controller
PID control system
O
2
density display
Digital display
Air circulation
Fan assisted
Air filter
0.3
m, Efficiency: 99.97 % or higher
Alarms
Automatic set temperature alarm, Automatic set CO
2
density alarm,
Automatic set O
2
density alarm, High limit temperature alarm,
CO
2
gas, various sensor/heater alarms
Remote alarm contacts
Allowable contact capacity: DC 30 V, 2 A
CO
2
inlet connection
4 mm to 6 mm diameter tube can be connected
CO
2
inlet pressure
0.03 MPa(G)
~
0.1 MPa(G) (0.3 kgf/cm
2
(G)
~
1 kgf/cm
2
(G), 4.4 psi(G)
~
14.5 psi(G))
O
2
inlet connection
4 mm to 6 mm diameter tube can be connected
O
2
inlet pressure
0.05 MPa(G)
~
0.1 MPa(G) (0.5 kgf/cm
2
(G)
~
1 kgf/cm
2
(G), 7.3 psi(G)
~
14.5 psi(G))
Weight
77 kg
Accessories
1 removable power supply cord, 1 power supply cord cover plate, 3 trays,
3 gas tubes, 1 humidifying pan, 6 tube bands,
1 gas injection nozzle, 1 gas injection nozzle tube
