background image

VTC-1D user manual  

 

Phason 

12  

2009-06-19 

 

 

Limited warranty 

This warranty applies only to the Phason Inc. (Phason) Variable Temperature Control (VTC-1D). If you 
need warranty service, return the product and original proof of purchase to your dealer. 
Phason warrants the VTC-1D subject to the following terms and conditions. 
This warranty is valid only to the original purchaser of the product, for two years from the manufacturing 
date. The manufacturing date is stated in the first eight digits of the serial number in the form year-month-
day.  
Phason hereby warrants that should this product fail because of improper workmanship, Phason will 
repair the unit, effecting all necessary parts replacements without charge for either parts or labor. 

Conditions 

‹

 

Installation must be done according to Phason’s enclosed installation instructions. 

‹

 

The product must not have been previously altered, modified, or repaired by anyone other than 
Phason. 

‹

 

The product must not have been involved in an accident, misused, abused, or operated or installed 
contrary to the instructions in our user and/or installation manuals. Phason's opinion about these 
items is final. 

‹

 

The person requesting warranty service must be the original purchaser of the unit, and provide proof 
of purchase upon request. 

‹

 

All transportation charges for products submitted for warranty must be paid by the purchaser. 

Except to the extent prohibited by applicable law, no other warranties, whether expressed or implied, 
including warranties of merchantability and fitness for a particular purpose, shall apply to this product. 
Any implied warranties are excluded.  
Phason is not liable for consequential damages caused by this product.  
Phason does not assume or authorize any representatives, or other people, to assume any obligations or 
liabilities, other than those specifically stated in this warranty. 
Phason reserves the right to improve or alter the VTC-1D without notice. 

 

Phason controls are designed and manufactured to provide reliable performance, but they 
are not guaranteed to be 100 percent free of defects. Even reliable products can experience 
occasional failures and the user should recognize this possibility.  
If Phason products are used in a life-support ventilation system where failure could result in 

loss or injury, the user should provide adequate back up ventilation, supplementary natural 
ventilation, or an independent failure-alarm system. The user's lack of such precautions 
acknowledges their willingness to accept the risk of such loss or injury. 

 

Phone:

204-233-1400

Fax: 204-233-3252

Phason Inc. 

2 Terracon Place 
Winnipeg, Manitoba, Canada 
R2J 4G7 

E-mail:

[email protected]

Web site:  www.phason.ca

Summary of Contents for VTC-1D













Reviews: