23
top of the drive. Refer to the following figures for exact locations and terminal Assignment.
Step 4: Insert Wires into Corresponding Terminals
Use a 6mm blade screw driver to loosen the screws on DC+ and Brk- Terminals which are in the
drive’s Power Supply Input Port (P1). Insert the two wires of the external brake resistor separately
into these two terminals. Then tight the screws.
Step 5
：
Wire Fixing
Use a cable tie to fix the wires on the cable support of AxN Size5 drive.
Summary of Contents for AxN series
Page 2: ......
Page 7: ...5 1 3 Overall Dimensions...
Page 32: ...30...
Page 37: ...35 When the drive is ready N O connects Com and N C disconnects Com illustrated as below...
