Phase Technology Phase Perfect PT007, Operation & Installation Manual

Page: 29 / 48

23 | Page
V2.1
OPERATION
LCD Status Screen
When the unit is powered up, the screen will scroll through the operating parameters.
Figure 22
– Status Screen
Figure 23
– “System Off” Status Screen
DIP Switch Settings
WARNING! Make sure the input power disconnect switch is in the OFF position
before opening the front cover to the unit. Opening the front cover with the switch in the ON
position exposes the user to the risk of electric shock.
WARNING: Risk of electric shock. Disconnect all incoming sources of power and wait
30 minutes before opening the front cover to change the DIP switch.
Figure 24
– Location of DIP Switches and Slide Switches
Table 22
– DIP Switch Settings
DIP Switch Function Default
2 Disable Auto Restarts OFF
9 & 10 Bypass AUX1 & AUX2 both ON OFF/OFF
10 Enable VFD Mode note: SW9 must be OFF OFF
Main DIP
Switch Array
Factory-Installed
Jumper Wire