Operation
28 | 40
Operating instructions sample cleaner SLN 4 | Revision 4
7.4.2
2. Sieve (sand sieve)
Pull the sieve to be changed.
Slide the new sieve on the sieving tray till the stop. It might have to be slightly lifted.
Pay attention to the mounting position; refer to
figure 17.
Figure 17: Sand sieve - mounting position
Dimensions: 300x350 mm
Item
Name
1
Engraved number
2
Surface not stamped
7.4.3
3. and 4. Grading sieve
Pull the Plexiglas cover and the sieve.
Figure 18: Grading sieve - Plexiglas cover
10 rubber balls are located in each of the three sieving tray areas. Keep the grading sieve clean and do not
remove it.
Figure 19: Grading sieve - rubber balls
