Operation
Revision 4 | Operating instructions sample cleaner SLN 4
23 | 40
7.2
Cleaning the samples
The
SLN 4
sample cleaner can be used to take the sorted small corn from the third grading sieve into the
rear lateral outlet pan.
Remove the rear collecting pan and access the lateral outlet from below.
Adjust the flap in the lateral outlet via the lever with spring:
Flap open:
Pull the lever on the
housing wall
The small corn goes into the lateral collecting tank
Flap closed:
Press the lever down
The small corn goes into the front collecting pan under
the fourth grading sieve
Figure 10: Lateral outlets
Item
Name
1
Lever with spring
2
Lateral outlet of third grading sieve for small corn (flap inside)
3
Outlet for sand, weed seeds and coarse dirt particles
Place each collection pan under the outlets at the intended places.
Fasten a dust collection bag at the cyclone.
Figure 11: Placing the collection pans and the dust collection bag
Item
Name
1
Outlet for small grain (3. Grading sieve)
2
Outlet for sand, weed seeds and coarse dirt particles
3
Outlet for small grain (4. Grading sieve)
4
Outlet - Cleaned sample
5
Dust collection bag
2
3
1
1
3
4
5
2
