Spare and wear parts
Revision 4 | Operating instructions sample cleaner SLN 4
35 | 40
Problem
Cause
Rectification
Machine does not show any
function.
System voltage not available.
Control switch ON/OFF
remains at OFF.
Internal fuse defective.
Get the system voltage checked
and activated by an
electrically
skilled person
.
Switch the control switch ON.
Checking and replacement by an
electrically skilled person.
Deawner bottom does not
open/close.
Pre-set (using nut on locking
lever) opening degree of the
deawner base has changed.
Trapped grains.
Trigger magnet without
function
Reset the opening degree
correctly with the help of nut and
locknut at the locking lever.
Shake the locking lever for the
deawner bottom and actuate the
control switch for manual
opening.
Checking and replacement by an
electrically skilled person.
Filler cap cannot be opened.
Trigger magnet does not
respond.
Pull up the locking lever slightly
by hand, which is located at the
centre under the filling cup.
Specifications about dysfunctions of the motor and control unit and its causes can be
obtained from the respective Operating Instructions of the manufacturer!
10
Spare and wear parts
NOTICE
We particularly emphasise that spare parts and accessories that have not been supplied
by us are also not checked and approved by us. The assembly and/or use of such
products can hence affect the specified design properties of the sample cleaner
SLN 4
under certain circumstances. Pfeuffer GmbH is not responsible for damages that occur
due to the use of non-original parts and non-original accessories.
Standard parts can be obtained at specialist shops.
The spare parts specified in the following are wear parts of sample cleaner
SLN 4
.
Wear part
Item number
Lever switch - Short, angled with rubber bushes
2350 0254
Lever switch - Long, angled with rubber bushes
2350 0256
Lever switch - Long, straight with rubber bushes
2350 0365
Rubber bush for eccentric axle
3135 1740
Other spare and replacement parts are available on request. A complete list of spare parts is available and
can be separately requested.
