Operating Instructions
MILOMAT
laboratory mill
© 2017 Pfeuffer GmbH
Revision 1
Page 17 of 32
7
Operation
The MILOMAT laboratory mill is only allowed to be operated by personnel who have
been qualified and trained in its operation.
Sample preparation
7.1
NOTE
Foreign bodies must be
removed
prior to the milling!
Select a
representative
and
cleaned
sample
for the milling.
Larger products (e. g. large bean seeds) can damage the
MILOMAT!
Carrying out a milling process
7.2
Figure 4: Close the cover
Close the cover of the milling chamber.
Pull the locking spindle forward and swing it to the
left over the tab.
Figure 5: Put on outlet nozzle
Place the bottom part of the measuring cell of the
moisture meter HE 60/90 under the outlet.
Push the outlet nozzle downwards on the bottom
of the measuring cell by turning it about 20 ° to the
left. The sealing rubber must rest on the measuring
cell rim. The integrated spindle protection prevents
the spindle from being soiled.
Figure 3:
Maximum grain size