Operating Instructions
MILOMAT
laboratory mill
© 2017 Pfeuffer GmbH
Revision 1
Page 11 of 32
In addition, he/she must comply with the local legal requirements on:
Safety of personnel (accident prevention regulations)
Accident prevention regulation DGUV Regulation 3 (previously BGV A 3) »Electrical systems and
equipment« (DGUV = Association of German Statutory Accident Insurance)
Safety of work equipment (protective equipment and maintenance)
Permitted noise load (depending on the site and time of day)
Product disposal (waste legislation)
Material disposal (waste legislation)
Cleaning (cleaning agents and disposal)
Hazardous substances (in Germany, the technical rules for hazardous substances – TRGS 555 apply)
Environmental protection regulations.
Electrical connections
The MILOMAT is only allowed to be connected to a socket earthed in accordance with
the regulations, using a protective conductor.
Illuminance
The owner must ensure that there is adequate and homogeneous illumination in all
areas.
At least 300 lux is recommended (maintained illuminance).
In Germany, ASR A3.4 applies (technical rules for workplaces - lighting).
General safety notes
2.5
The safety equipment and safety notes described in these operating instructions must be
complied with.
1.
Disconnect the MILOMAT from the mains if there are malfunctions.
2.
Disconnect the MILOMAT from the mains before cleaning work.
3.
Do not allow the MILOMAT to get wet during transport, storage, cleaning and
operation.
4.
Make sure that the MILOMAT is only operated when in correct working order.
5.
Never touch the mains cable with moist hands.
6.
Only use genuine spare parts and accessories (see
chapters 10
