Setting up
26
●
Insert the bobbin into the bobbin case
1.
●
Pass the thread through the slot under
spring
2.
●
Pass the thread through the notch.
●
Adjust the thread tension by turning
screw
3.
When the thread is pulled,
the bobbin must rotate in the
direction of the arrow.
Fig. 8 -04
Fig. 8 -03
Switch off the machine!
Danger of injury due to uninten-
tional starting of the machine!
Removing the bobbin case:
●
Open the post cap.
●
Raise latch 1 and remove bobbin case 2.
Inserting the bobbin case:
●
Insert bobbin case 2.
●
Close the latch and close the post cap.
Do not operate the machine
with an open post cover
1!
Risk of injury from rotating
clamp!
8
.03
Removing/Inserting the bobbin case
2
1
8
.04
Threading the bobbin case/Adjusting the bobbin thread tension
2
1
3
5 cm
Summary of Contents for POWERLINE 2571 ME PLUS
Page 55: ...Note ...
