Pfaff POWERLINE 2571 ME PLUS Instruction Manual Download Page 8

Page: 8 / 56

Safety

Fig. 1 - 01

.06

Danger warnings

A working area of

must be kept free both in front of and behind the machi-

ne, so that easy access is possible at all times.

Never put your hands or fi ngers in the sewing area during sewing!

Danger of injury by the needle!

While setting or adjusting the machine do not leave any objects on the table nor

in the needle plate area! Objects may be trapped or fl ung out of the machine!

Do not run the machine without take-up lever guard

Danger of injury by moving take-up lever!

Do not operate machine without cover

and belt guard

Risk of injury from moving parts!

Do not operate the machine without tilt lock

Danger of crushing between sewing head and table!

Do not operate the machine without support

! Danger due to top-heavy

sewing head! Machine can tip over backwards when tilted!

Summary of Contents for POWERLINE 2571 ME PLUS

























































Search results

Summary of Contents for POWERLINE 2571 ME PLUS

Reviews:

Related manuals for POWERLINE 2571 ME PLUS

Brands by name

Popular brands

Pfaff POWERLINE 2571 ME PLUS, Instruction Manual

Search results

Summary of Contents for POWERLINE 2571 ME PLUS

Reviews:

Related manuals for POWERLINE 2571 ME PLUS

Brands by name

Popular brands