Pfaff 3519-4/01, Instruction Manual, Page: 52 / 160

Input
52
11
.02.05
Entering correction values
In the seam programming function, it is possible to enter correction values for the current
seam program, after calling up the appropriate function. In the case of single-pointed and ta-
pered darts it is also possible to fi x the value for the uncut material fold length.
Enter or change the correction values for the dart length
●
L1, the dart depth L3 and the
waist depth L4.
Enter or change the value for the uncut material fold length.
●
Conclude the input of the correction values.
●