Pfaff 3519-4/01, Instruction Manual, Page: 118 / 160

Adjustment
118
13
.25.02
Parameter list
Group P
arameter
Description S
et
ting range
S
et value
1 101 Bobbin thread monitor
0 - 2 1
102 Bobbin thread reverse counter
0 - 999 100
103 Needle thread monitor ON - OFF ON
104 Fade-out stitches needle thread monitor 0 - 99 5
105 Reaction time needle / bobbin thread monitor 1 - 9 1
106 Cycle without positioning tube ON - OFF OFF
107 Ironing compensation strip ON - OFF OFF
108 Sewing off ON - OFF OFF
109 Cycle without trimming ON - OFF OFF
110 Sewing stop in case of needle thread fault ON - OFF OFF
111 Remaining piece counter after reaction of bobbin thread
sensor
0 - 500 20
112 Continuous running / test function ON - OFF OFF
113 Wiper 2 closed on left part ON - OFF OFF
114 Loading clamp 2 (switching in cycle) ON - OFF OFF
115 Automatic program number change with change
right / left
right = station key 0, left = station key 1
0 - 1 0
116 Additional path in material clamp [ 0.1 mm] 100 - 500 100
117 Switch on vacuum table later ON - OFF OFF
118 Tact marking laser ON - OFF ON
119 Unitary material thickness in program groups
120 Assignment of material thickness to a program group
0 = material thickness group 0 [in 0,1 mm]
1 = material thickness group 1 [in 0,1 mm]
2 201 Stitch length for start tacks
(1 = standard stitch length; 2 = ½ standard stitch length)
1 - 2 1
202 No. of stitches for start tacks 1 - 9 2
203 Stitch length for condensed start stitches [0.1 mm] 10 - 30 12
204 No. of stitches for condensed start stitches 1 - 9 5
205 Stitch length for condensed end stitches [0.1 mm] 10 - 30 12
206 No. of stitches for condensed end stitches 1 - 9 4