Pfaff 3519-4/01, Instruction Manual, Page: 108 / 160

Adjustment
108
13
.21
Adjusting the sensor on the stacker clamp
Requirement
1. LED 2 should light up, if there is no material between sensor 3 and refl ector 4.
2. LED 5 should light up, if there is material between sensor 3 and refl ector 4.
Press down key
●
1 for approx. 5 seconds until LED 2 fl ashes quickly.
After key
●
1 has been released, sensor 3 begins with the learning process “no material”.
To set off the learning process “material”, place a piece of think white material directly un-
●
der refl ector 4.
Confi rm by pressing key
●
1.
Press key
●
1 again within 5 seconds. The starting function changes from the set-up
“bright” (standard) to “dark”.
Carry out a function control in accordance with requirements
●
1 and 2.
Fig. 13 - 42
1
2
3
4
5