Pfaff 3519-4/01, Instruction Manual, Page: 40 / 160

Sewing
40
10
.02
Sewing in automatic operation
When the machine is switched on, the automatic operation function of the sewing mode is
always selected automatically.
Switch on the machine.
●
Switch on the suction air of the positioning tube or the loading table, see Chapter
●
7.06 Pedal .
Insert the workpiece, see Chapter
●
10.01 Inserting the workpiece .
Operate the start keys to start the sewing cycle, see Chapter
●
7.07 Start keys .
Description of the functions on the display
Menu for entering the program number
This functions opens the menu for entering the program number, see Chapter 9.07 Selec-
ting the program number .
Input menu
This function is used to call up the input mode, see Chapter 11 Input .
Program selection
Each of these functions is used to select a program from the respective program group, also
see Chapter 9.08 Selecting / confi guring program groups .
Material thickness
This function opens a menu for changing the material thickness.
Automatic operation
This function shows the actual operating mode and changes between automatic and manu-
al operation.
Sewing foot up/down
This function is used to raise or lower the sewing foot.
Right/left part
This function is used to switch the automatic change from the right to the left part on or off.
The part currently being processed is shown.