Pfaff 3519-4/01, Instruction Manual, Page: 18 / 160

Controls
18
Fig. 7 - 05
7
.05
Control panel
The current operating conditions are dis-
played on control panel 1. Operation takes
place in a constant dialogue between the
control unit and the operator. For this pur-
pose, depending on the operating conditi-
on of the machine, different symbols and/or
texts are displayed. If the symbols or texts
are framed, these show functions which can
be selected by pressing the appropriate po-
sition on the monitor. By pressing the cor-
responding function this is carried out or
switched on or off immediately, or a further
menu appears, e.g. for entering a value. Ac-
tivated functions are shown with inverted
symbols. Unframed symbols or texts are
only used for display purposes and cannot
be selected by pressing.
To read sewing programs or install machine software, use the sd-card 2 in the control
panel.
1
2 GB
max.
2
7
.06
Pedal
The suction air for the loading table and
●
the positioning tube are switched on and
off by operating pedal 1.
Fig. 7 - 06
1