PEUGEOT Ludix 4T, Workshop Manual

Page: 22 / 56

SERVICE OPERATIONS
20
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
„
Changing the engine oil
The engine must be drained when it is
warm to allow the oil to run easier.
Wear gloves in order not to get burnt.
- Place the vehicle on its central stand on flat
ground.
- Remove the engine's oil filler cap (1).
Remove the drainage cap and its
seal (2) and allow the oil to drip into a
recipient.
Replace the copper seal every time you
change oil.
- Remove the strainer cap (3) and clean the
strainer (4).
Every time oil is changed, the filter (4)
must be cleaned and the O-ring
changed (5).
- Put back the drainage cap and strainer cap,
fitted with a new seal.
Tightening torques:
• Filler cap: 20 Nm.
• Screen: 15 Nm.
- Pour the required quantity of oil
corresponding to the manufacturer's
standards into the filler hole.
Quantity: 0.65 l.
1
XXXXXX-X
*
XXXXXXXX
*
2
N
3
5
4