1
INSTRUMENTS and CONTROLS
28
TRIP COMPUTER
or
TRIP (Route): access to
the trip computer displays.
Each successive press on the button
located at the end of the
wipers stalk
displays different information.
LIGHTING RHEOSTAT
Zero reset
When the required route is displayed,
press the control for more than
two seconds.
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum
(or maximum) setting, release the
button then press it again to increase
(or reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
- the
''vehicle''
tab with:
the range,
the current
consumption
the distance remaining.
- the route
''1''
tab with:
the distance travelled,
the average
consumption,
the average speed,
for the fi rst route.
- the route
''2''
tab with:
the distance travelled,
the average
consumption,
the average speed,
for the second route.
The routes
The routes
''1''
and
"2"
are independent
but have identical application.
Route
''1''
for example allows you to
make daily calculations and route
''2''
monthly calculations.
Summary of Contents for 407 2009
Page 15: ...1 INSTRUMENTS and CONTROLS 18...
Page 34: ...3 COMFORT 34...
Page 161: ...11 11 TECHNICAL DATA 139 DIMENSIONS IN MM 407 saloon 407 SW...
Page 175: ...153 03 GPS...
