PEUGEOT 407 2009, Manual

Page: 80 / 250

4
ACCESS
71
Safety auto-reverse
If the shutter encounters an obstacle
during closing, it stops and partially
opens again.
You must reinitialise the safety auto-
reverse within a maximum of fi ve se-
conds after the concealing shutter has
stopped:
- press part
A of the control until the
shutter is completely closed (closing
in stages of a few centimetres).
PANORAMIC ROOF
(407 SW) In the event of contact during
operation of the shutter, you
must reverse its movement.
To do this, press the control
concerned.
When the driver operates the shutter
control, he must ensure that no one
is preventing the shutter from closing
correctly.
The driver must ensure that the pas-
sengers use the concealing shutter
correctly.
Pay attention to children during opera-
tion of the shutter.
Notes :
Following reconnection of the battery,
in the event of a shutter malfunction
while it is moving or immediately after
it has stopped, you must reinitialise
the safety auto-reverse:
- place the control in the fully open
position (position "0"),
- wait until the shutter is in the fully
open position,
- press section
A of the control for at
least three seconds.
In the event of unwanted opening of
the shutter on closing, and immediately
after the shutter has stopped:
- move the control to the fully closed
position (9th setting to the left) then
press part
A of the control straight
away,
- continue to press the control until
the shutter is fully closed.
The safety auto-reverse function is
not active during these operations.
Your vehicle is fi tted with a tinted glass
panoramic roof which increases the
light and visibility in the passenger com-
partment. Its electric concealing shutter
improves temperature conditions.
The concealing shutter is controlled
electrically by a dial with nine opening
positions.
To close: turn the dial to the left (nine
possible settings).
To open: return the dial to the initial
position "0" .