PEUGEOT 407 2009, Manual

Page: 46 / 250

3
COMFORT
46
You must programme your departure
time in order for the system to
calculate the optimum heater start
time automatically.
Programming the heating
Set the time by pressing the buttons
1
and press buttons
4 and 5 simultane-
ously to save it.
Programming the departure time
Press the buttons 1
to display the
programming time.
This symbol is displayed.
Once the programming time has been
displayed, press buttons
4 and 5 si-
multaneously within 10 seconds.
This symbol fl ashes.
This symbol is displayed (fi xed).
Once the programming time has been
displayed by means of the buttons
1 ,
press button
5
(ON) until the message
"OK"
appears.
Activation - deactivation
When the signal has been received,
the message
"OK"
is displayed
along with the symbol
"HTM"
.
To deactivate the programming, press
button 4
(OFF) until the message
"OK"
appears.
HTM: Heat Thermo Manage-
ment.
The symbol
"HTM" is switched
off.
When carrying out these oper-
ations, if the message "FAIL"
appears, the signal has not
been received. Repeat the
procedure after changing your
location.
This symbol is displayed when
the heater starts.
Switching off the heating
Press button 5
(ON).
The symbol
"HTM" remains
on.
Changing the level of heating
The system offers
5 levels of heating
(from the lowest level C1 to the high-
est level C5
).
Once the level of heating has been
displayed by means of the buttons
1 ,
press buttons
4 and 5
simultaneously.
The letter "C"
fl ashes.
Set the level of heating by pressing
the buttons 1
.
Press buttons 4 and 5
simultaneously
to save the level selected. The letter
"C"
is displayed (fi xed).
The factory pre-sets are re-
placed by the new settings en-
tered. The programmed times
are stored until the next time
they are changed.
When the departure time is acti-
vated, the level of heating cannot be
changed. The departure time must be
deactivated fi rst.