Wintax – Layouts
Throttle
The left window will help you to check both throttle and pedal functioning:
–
Check that the 4 channels dedicated to throttle (target, calculated throttle position, throttle position 1 and 2) are same
values. If
Throttle1
and
Throttle2
are different, it means that one of the electric track of the throttle is damaged. If
Throttle
differs from
ThrottleTgt
, it means the throttle command is not working well (electrical OC or SC with the loom
between the ECU and the throttle body or Throttle motor failure).
–
Check that the 3 channels dedicated to pedal (calculated pedal position, pedal position 1 and 2) are same values. If one
of them is different, it means that one of the electric track of the pedal is damaged.
–
You can see which throttle map has been selected.
–
You can see the Throttle Diagnostic, it must be 0.
–
You can check the status of the throttle/pedal learning. It must be 0 when you are not doing the learning.
The top right window shows how is the throttle/pedal map selected by the driver.
The bottom histogram shows you the distribution of pedal and throttle positions.
Main window
Page 49/67
Version 24/04/2015
