PEUGEOT 208 T16, User Manual

Page: 25 / 67

When an alarm is ON, this page is displayed with a message and the dedicated value
Display – Alarms and Warnings
When more than one alarm is active, the most important is displayed. If you want to see the
other alarms, push on the swap alarm button.
ALARMS
Message LED Parameters Condition Secondary condition
DO RESET Bug init ECU PedThrLearnState >= 8 RPM = 0
OIL P LED 1 Blink Low engine oil pressure POil <= 3 bars RPM >= 3000 tr/mn and Throttle >= 70°
OIL T LED 1 Blink High engine oil temperature TOil >= 140°C RPM > 1000
WATER T LED 1 Blink High cooling System Temperature Water_T >= 120°C RPM > 1000
WATER P LED 1 Blink Cooling System Pressure out of range PWater <= 1,5 or PWater >= 3 bars RPM > 1000 and Twater >= 90°C
P2 KO P2 sensor KO DiagAcqAna0 = 10 or 11 Power On and RPM > 0
LOW BATT LED 2 still Low battery voltage VBatt <= 11,3 V RPM > 1000
GBOX T LED 2 still High gearbox oil température TGearbox >= 130°C RPM > 1000
DIFF T LED 2 still High rear diff oil température Tdiff_R >= 120°C RPM > 1000
EXAUST T LED 2 still High exhaust temperature T4 T4 >= 950°C RPM > 0 and CarSpeed > 0
FUELP KO Fuel pressure sensor KO DiagAcqAna0 = 26 or 27 RPM > 1000
FUEL P Low fuel pressure PfuelHP <= 50 bars RPM > 0
P1 KO Unplugged P1 sensor DiagAcqAna0 = 8 ROAD
HIGH OFF LED 2 still BRK High Current Outlet KO BRK_DiagLC1 > 0
LOW OFF LED 2 still BRK Low Current Outlet KO BRK_DiagLC2 > 0
PEAL KO LED 2 still PEAL KO Paccu <= 40 bars RPM > 0 and Power On and CarSpeed > 0
SMOT No engine speed BRK_SW = 25 RPM = 0
LEARN KO Learning throttle and pedal position KO PedThrLearnState = 2 CarSpeed = 0
Nturbo LED 1 Blink High turbo speed nTurbo >= 200.000 rev.
WARNINGS
Message LED Parameters Condition Secondary condition
LEARNING Learning throttle and pedal position 3 <= PedThrLearnState <= 7 RPM = 0
LOADING Increasing of the PEAL accumulator pressure Paccu <= 45 bars Power On and CarSpeed = 0
DROPPING Dropping of the PEAL accumulator pressure Paccu >= 6 bars Power OFF
TURBO LED 4 Blink Do not switch off the engine T4 >= 600°C ROAD and Gear = 0 and CarSpeed < 10
PARK Handbrake ON PHandBrake >= 30 bars ROAD and CarSpeed < 10 and PBrakeR <= 5 bars
GO !!! Launch system ready P2P >= 1,9 bars Launch
LAUNCH Launch system ON Start 4WD = 1 CarSpeed = 0 and RPM > 0
Page 25/67
Version 24/04/2015