Wintax – Layouts
PEAL
The rear clutch is on when the difference (
Diff_Hd_Rr_Brake
) between the rear brake pressure (
PBrake_R
) and the handbrake
pressure (
PHandBrake
) is over 7 bars (limit represented by a dashed line). When this threeshold is reached, the clutch is ON
(
PEAL_Cmd
= 1) and the pressure in the PEAL accumulator (
Paccu
) drops.
If the PEAL accumulator pressure is under 65 bars, the PEAL engine is running (you can see it with the current consumed :
I_H17_PEAL
and
I_H18_PEAL
) to increase the pressure in the accumulator up to 70 bars.
On the right window, you have a report of:
–
The number of handbrake uses (
HandBrake_MaxNb
)
–
The number of accumulator reloads or pressure increase process (
PEAL_Reload_MaxNb
)
–
The average time to reload the accumulator (
PEAL_Reload_AvgTime
)
–
The number of handbrake uses in stage (
HandBrake_MaxNb_SS
)
–
The number of accumulator reloads or pressure increase process in stage (
PEAL_Reload_MaxNb_SS
)
–
The average time to reload the accumulator in stage (
PEAL_Reload_AvgTime_SS
)
Main window
Page 58/67
Version 24/04/2015
