Calibration of throttle pedal and throttle body
Important:
The calibration must be done:
- after the replacement of the throttle pedal of throttle body
- after the replacement of the ECU
- after the replacement of the engine
Procedure
1. Engine must be OFF and gearbox in neutral
2. Main switch OFF
3. Keep pushing the throttle pedal
4. Main switch ON
5. Wait for the 1st message on the display
6. Then release the throttle pedal when displayed
7. Wait for the message of calibration success
8. Main switch OFF
If you get a message of calibration failure, please proceed to a new calibration procedure
Page 9/67
Version 24/04/2015
