PEUGEOT 2008 Handbook Download Page 121

Page: 121 / 260

119

Driving

Driving situations and related alerts

The table below describes the alerts and messages displayed in different driving situations.

These alerts are not displayed sequentially.

Function status

Indicator lamp

Display and/or associated

message

Comments

OFF

(grey)

Function deactivated.

(grey)

System active, conditions not met:

– speed below 40 mph (65 km/h),

– no lane marking recognised,

– ASR/DSC systems deactivated or operation of ESC

system triggered,

– "sport" driving.

(grey)

Automatic deactivation/standby of the function (for

example, due to detection of a trailer or use of the "space-

saver" spare wheel provided with the vehicle).

(green)

Lane marking detection.

Speed above 40 mph (65 km/h).

(orange)/(green)

The system corrects the trajectory on the side where the

risk of unintentional crossing is detected (orange line).

Summary of Contents for 2008





































































































































































































































































Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands

PEUGEOT 2008, Handbook

Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands