PEUGEOT 2008 Handbook Download Page 192

Page: 192 / 260

190

PEUGEOT Connect Radio

Enter the FM and AM waveband values

using the virtual keypad.

Press "

" to confirm.

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a USB charger

connected to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode.

This phenomenon is perfectly normal in the

context of radio wave transmission, and

in no way indicative of an audio system

malfunction.

Changing the waveband

Press

Radio Media

to display the main

page.

Press the "

OPTIONS

" button to access the

secondary page.

Press "

Band

" to change waveband.

Press in the shaded area to confirm.

Presetting a station

Select a radio station or frequency.

Make a short press on the star outline. If

the star is solid, the radio station is

already preset.

Navigation

Configure the navigation and select your

destination via MirrorLink

, CarPlay

Android Auto.

Air conditioning

21,5

18,5

Manage various temperature and air flow

settings.

Applications

Viewing photos

Insert a USB memory stick in the USB port.

To protect the system, do not use a USB

hub.

The system can read folders and image files in

the formats: .tiff; .gif; .jpg/jpeg; .bmp and .png.

Press

Applications

to display the main

page.

Press "

Photos

Select a folder.

Select an image to view.

Press this button to display the details of

the photo.

Press the back arrow to go back a level.

Managing messages

Press

Applications

to display the main

page.

Press "SMS".

Select the "SMS” tab.

Press this button to select the display

settings for messages.

Press this button to search and select a

recipient.

Select the "Quick messages” tab.

Press this button to select the display

settings for messages.

Press this button to write a new message.

Press the bin alongside the selected

message to delete it.

Press this button alongside the selected

message to display the secondary page.

Press this button to edit and modify the

existing text.

Press this button to write a new message.

Press the bin to delete the message.

Radio

Selecting a station

Press

Radio Media

to display the main

page.

Press one of the buttons to perform an

automatic search for radio stations.

Move the slider to manually search for

frequencies up or down.

Press the frequency.

Summary of Contents for 2008





































































































































































































































































Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands

PEUGEOT 2008, Handbook

Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands