PEUGEOT 2008 Handbook Download Page 13

Page: 13 / 260

Instruments

Customising the instrument

panel

Depending on version, the appearance of the

instrument panel may be customisable (colour

and/or display mode).

Display language and units

These depend on the touch screen

settings.

When travelling abroad, the speed must be

shown in the official units of the country you

are driving in (mph, miles or km/h, km).

As a safety measure, these adjustments

must be carried out with the vehicle

stationary.

Choosing the display colour

(With PEUGEOT Connect Nav)

Depending on version, the instrument panel

display colour depends on the colour scheme

chosen in this system.

► Press

Settings

in the banner of the

touch screen.

► Select "

Color schemes

► Select a display colour and then press

" to confirm.

Choosing the display mode

In each mode, specific types of information are

displayed on the instrument panel.

Changing the display mode

► Turn the thumbwheel on the left of the

steering wheel to display and scroll through the

various modes on the instrument panel.

► Press the thumbwheel to confirm the mode.

If you do not press the thumbwheel, the selected

display mode is automatically applied after a few

moments.

Presentation of display modes

– "

DIALS

": standard display of analogue and

digital speedometers, total distance recorder

and:

• fuel gauge, coolant temperature indicator

and rev counter (Petrol or Diesel).

• battery charge indicator and power indicator

(Electric).

–

NAVIGATION

": specific display, showing

the current navigation information (map and

instructions).

– "

DRIVING

": specific display, showing the

information relating to active driving aid systems.

– "

MINIMAL

": 2D display with digital

speedometer, total distance recorder and:

• fuel gauge and coolant temperature indicator

(Petrol or Diesel).

• battery charge indicator (Electric).

– "

ÉNERGIE

": specific display, showing a visual

representation of the vehicle’s energy flows

(Electric).

– "

PERSONAL 1

"/"

PERSONAL 2

": displays the

information selected by the driver in the centre of

the instrument panel.

Configuring a "PERSONAL" display mode

With PEUGEOT Connect Radio

► Press

Settings

in the banner of the

touch screen.

► Select "

Configuration

► Select "

Instrument panel

personalisation

With PEUGEOT Connect Nav

► Press

Settings

in the banner of the

touch screen.

► Select "

OPTIONS

► Select "

Instrument panel

personalisation

► Select "

PERSONAL 1

" or "

PERSONAL 2

► Select the type of information using the scroll

arrows on the touch screen:

• "

Default

" (empty).

• "

Trip computer

• "

Media

• "

G-metres

" (depending on version).

Summary of Contents for 2008





































































































































































































































































Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands

PEUGEOT 2008, Handbook

Search results

Summary of Contents for 2008

Reviews:

Related manuals for 2008

Brands by name

Popular brands