55
Lighting and visibility
4
Exterior lighting control
stalk
Main lighting
Automatic illumination of lamps/daytime
running lamps
or
Lamps off (ignition off)/
Daytime running lamps (engine running)
Sidelamps only
Dipped or main beam headlamps
Headlamp dipping
► Pull the stalk to switch between dipped and
main beam headlamps.
In the lighting off or “
AUTO
”, depending on
version, and sidelamps modes, the driver can
switch on the main beam headlamps temporarily
(“headlamp flash”) by pulling the stalk.
Displays
Illumination of the corresponding indicator lamp
in the instrument panel confirms that the lighting
selected is on.
A fault with a lamp is signalled by the
permanent illumination of this warning
lamp, accompanied by the display of a message
and an audible signal.
Rear foglamps
They only work if the dipped beam
headlamps are on.
► Rotate the ring forwards to switch them on
and backwards to switch them off.
When the lamps are switched off automatically
("
AUTO
" position), the foglamp and the dipped
beam headlamps will remain on.
Front foglamps/Rear
foglamps
They operate with the sidelamps, dipped
or main beam headlamps on.
► Rotate the ring forwards:
• once to switch on the front foglamps,
• a second time to switch on the rear foglamp.
► Rotate the ring backwards:
• once to switch off the rear foglamp,
• a second time to switch off the front
foglamps.
If the lighting is switched off automatically
("
AUTO
" position) or the dipped beam
headlamps are switched off manually, the
foglamps and sidelamps remain on.
Summary of Contents for 2008
