120
Driving
Function status
Indicator lamp
Display and/or associated
message
Comments
ON
(orange)/(green)
"Hold the wheel"
– If, while correcting the trajectory, the system determines
that the correction will not be enough and that a solid line
will be crossed (orange line): the driver is warned that they
must provide additional trajectory adjustment.
– If the steering wheel is not held properly, an audible
warning sounds, accompanied by a message, until
the trajectory correction is completed or the driver has
grasped the steering wheel correctly.
The duration of audible warnings will increase if multiple
corrections are performed in quick succession. The
warning will become continuous, persisting until the driver
responds.
Operating limits
The system goes into standby automatically in
the following cases:
– ESC deactivated or operation triggered.
– Speed below 43 mph (70 km/h) or greater
than 112 mph (180 km/h),
– Electrical connection of a trailer.
– Use of a"space-saver" spare wheel detected
(as detection is not immediate, deactivation of
the system is recommended).
– Dynamic driving style detected, pressure on
the brake or accelerator pedal.
– Driving where there are no lane markings.
– Activation of the direction indicators.
– Crossing the inside line on a bend.
– Driving in a tight corner.
– Inactivity by the driver detected during
correction.
The following situations may interfere
with the operation of the system or
prevent it from working:
– Insufficient contrast between the road
surface and the side of the road (e.g. shade).
– Lane markings worn, hidden (snow, mud)
or multiple (roadworks, etc.),
– Running close to the vehicle in front (the
lane markings may not be detected).
– Roads that are narrow, winding.
Risk of undesirable operation
We recommend deactivating the system in the
following driving situations:
– Driving on damaged, unstable or very slippery
(ice) road surfaces,
– Poor weather conditions.
– Driving on a speed circuit.
– Driving on a rolling road.
Deactivation / Activation
► Press this button to deactivate / reactivate the
system at any time.
Deactivation is signalled by the lighting of
the indicator lamp in the button and this
warning lamp in the instrument panel.
The system is
automatically reactivated
every
time the ignition is switched on.
Malfunction
In the event of a system
malfunction, these warning lamps
come on on the instrument panel, accompanied
by an onscreen message and an audible signal.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.
Active Blind Spot
Monitoring System
Refer to the
General recommendations on the
use of driving and manoeuvring aids
.
This system includes sensors, placed on the
sides of the bumpers, and warns the driver of
Summary of Contents for 2008
