STEERING/FORK
52
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
STEERING/FORK
Changing the front fork seals
- Remove the front lower shield panels. See:
Procedure 2. page 23.
- Suspend or immobilize the machine securely.
- Remove the front brake caliper from the fork
tube (2 screw).
Tightening torque: 10 Nm.
- Loosen the wheel spindle clamping screw (1).
- Remove the wheel spindle (2).
- Remove the front wheel.
- Remove the fork guard (2 screw).
- Unscrew the 2 upper screws (3) on the fork tee.
- Remove the fork tube cap (4).
- Unscrew the 2 lower screws (5) from the fork
Tee.
- Remove the fork tubes.
- Drain the front fork. See chapter: Draining the
front fork, page 51.
- Secure the stanchion in a vice fitted with
protection.
- Remove the tightening screw from the internal
tube and its seal (6).
- If necessary use a mallet to dislodge the
screws.
1
2
3
4
5
6
